Getting Started With Your Anyware Smart Adaptors
24024
page-template,page-template-full_width,page-template-full_width-php,page,page-id-24024,qode-social-login-1.0,qode-restaurant-1.0,ajax_fade,page_not_loaded,,select-theme-ver-4.1,wpb-js-composer js-comp-ver-5.2,vc_responsive

Getting Started Guide

Set up your Anyware Smart Adaptor™ in just a few simple steps

What you need

 
Make sure you have these things ready

You Don’t Need

Extra WiFi Gateway (AP), Tools or Batteries

LED Light Bulb

Use Small Socket

Type E14/E12

Choose an LED light bulb, type E14, for Anyware Smart Adaptor™ version E27/E14

Choose an LED light bulb, type E12, for Anyware Smart Adaptor™ version E26/E12

Anyware Smart Adaptor™

Your First

Anyware Smart Adaptor™

Choose E27/E14 version if you live in Europe, Middle East, Africa or Asia (check out the list of E27/E14 countries here)

Choose E26/E12 version if you live in North America, Japan or a country on this list

Lamp

Ideally, Use a Lamp that You Can

Keep Mains Powered

Type E27 in Europe and most other countries

Type E26 in North America, Japan and countries on this list

1. Download the Anyware App™

 
Sign Up and Verify Your Email Before You Log In

Use only LED light bulbs

Halogene or incandescent ligt bulbs will not work, because they emit too much heat, and a built-in electronic fuse in the Anyware Smart Adaptor™ will switch off the light bulb.

The Anyware Smart Adaptor™ will not be damaged, and will still work as a Room Sensor, but without light control

You can use both non-dimmable and dimmable LED light bulbs.

However, the awesome dimming capabilities of the Anyware Smart Adaptor™ will not work (properly), if you fit a non-dimmable LED light bulb

Download the Getting Started Guide here
Download the Technical Data Sheet here

2. Install The Hardware

 
Fit the Anyware Smart Adaptor™ into your lamp socket

Remove the light bulb from the lamp where you want to use the Anyware Smart Adaptor™

Fit the E14/E12 LED light bulb (only LED) into the Anyware Smart Adaptor™

Fit the Anyware Smart Adaptor™ with light bulb into the lamp socket

Use your smartphone to connect the Anyware Smart Adaptor™ to the internet

3. Connect The Anyware Smart Adaptor™ To The Internet

 
Follow the instructions in the Anyware App to connect via you WiFi router

1. Make life easy

Turn ON WiFi, Bluetooth and GPS before you start

2. Tap ‘Add Smart Adaptor’ in the Dashboard to start pairing

3. Select ‘Anyware Smart Adaptor™’

4. Name the Smart Adaptor

You can add it to a ‘Room’ later in the Anyware App™

5. Name your Location

If the GPS positioning is not precise, you can type your address manually

6. Connect to your 2.4 GHz WiFi router

Tap the WiFi icon, if your WiFi network does not show

7. Connecting Your Smart Adaptor Using Bluetooth

8. Connecting To Internet Via Your Home WiFi Router

9. Success Looks Like This

10. Try These Features In The Anyware App™

Enjoy!

4. Start Using The Anyware App™

 
Dim Your Light | Activate Your Home Security Automatically | Monitor Rooms and Your Vacation Home
Intrusion Alarm Dark Circle

Intrusion Detection

PreventiveBurglarControl Dark Circle

Preventive Burglar Control

EnergyManagement Dark Circle

Energy Saving Mode

Indoor Monitor Dark Cirle

Indoor Climate Monitoring

As easy as fitting a light bulb

0

Your Cart